Console Box, Wide Body with Bother Pocket Jet series Printer Mount; Includes 3 faceplates and 3 filler panels. | 7160-0958 | 7160-0958

Description

Console Box, Wide Body with Bother Pocket Jet series Printer Mount; Includes 3 faceplates and 3 filler panels. Gamber-Johnson part number 7160-0958.SpecificationsWeight29.85 lbs. / 13.5 kgHeight11.75″ / 29.8 cmWidth11.88″ / 30.2 cmDepth24.75″ / 62.9 cmFeaturesLow profile, universal console with sloped front mounting areaDesigned to work with Top Plate / Tunnel Plate and Leg Kits Two 12 Volt plug knockouts, located on the passenger side wall of console box and one knockout for switches , dual USB power ports, battery voltage display, data / mic jack or USB / AUX input module extensionThreaded inserts for mounting mic clip (item no. 7120-0723) or Magnetic Mic (item no. 17040) on both sidesSide vented openings for air flow or mounting a speaker inside the console boxThreaded inserts on both sides of console box for side armrest mounting (item no. 7110-1012 – passenger side armrest) and (item no. 7110-1013 – driver side armrest)Threaded inserts on passenger sides of console box for the passenger side document compartment (item no. 7160-0464) and driver side armrest (item no. 7110-1013)Threaded inserts on back of console box for mounting external cup holder (item no. 7160-0847) and MCS armrest (item no. 7160-0429) or printer armrest (item no. 7160-0430)Front plate of console (underneath dash area) has placement for a power distribution block or Lind shutdown timer using preconfigured mounted holesBox shipped assembled, except accessoriesComputer can be center mounted in two locations:Offset towards the passenger on the smiley face patternOn the 3bolt pattern closer to the driver for easy articulation accessFully welded construction for long term product life span3 faceplates and 3 filler panels are includedVehicle CompatibilityUNIVERSALProduct DetailsDevice OEM: Chrysler, Dodge, Ford, Universal/OtherWarranty: Limited Lifetime WarrantyMounting Space: Designed to house devices and accessories measuring less than 6 inches in depth, Has additional side mounting area of 2″ that will accommodate the 2-inch Faceplate for Switches or Power, Horizontal, Low Profile SectionHas a consistent mounting space height of 6.0″, Mounting for the Brother Pocket Jet series printer and roll of paper in the back of the console box, Ports (item no. 7160-0924) or a smaller device, Removable printer cover for easy reloading of printer paper, Two 12 Volt plug Knockouts, located on top passenger side and 2 knock-outs for switches , dual USB power ports, battery Voltage display, data / mic jack or USB / AUX input module extension, Vertical, Angled Section:Accommodates 1 to 2 full sized devices or faceplates (5″ of mounting space)Sub Type 1: Console SystemSub Type 2: Console BoxSub Type 3: WideDownloadsInstallation Guide (PDF)