Description

Kingston FURY KF552C40BBAK2-16 is a kit of two 1G x 64-bit (8GB) DDR5-5200 CL40 SDRAM (Synchronous DRAM) 1Rx16 memory modules, based on four 1G x 16-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 3.0. The total kit capacity is 16GB.

Each module has been tested to run at DDR5-5200 with low-latency timings of 40-40-40 at 1.25V. The SPDs are programmed to JEDEC-standard DDR5-4800 timings of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.

Specifications:

CL (IDD) 40 cycles
Row Cycle Time (tRCmin) 48 ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 295 ns (min.)
Row Active Time (tRASmin) 32 ns (min.)
UL Rating 94 V – 0
Operating Temperature 0C to +85C
Storage Temperature -55C to +100C
Factory Timing – Default (JEDEC) DDR5-4800 CL40-39-39 @ 1.1V
Factory Timing – XMP Profile #1 DDR5-5200 CL40-40-40 @ 1.25V
Factory Timing – XMP Profile #2 DDR5-4800 CL38-38-38 @ 1.1V
Power Supply (VDD) 1.1V Typical
VDDQ 1.1V Typical
VPP 1.8V Typical
VDDSPD 1.8V to 2.0V
On-Die ECC Supported
Module Height 1.66 (42.23 mm) with heatsink

Reviews

There are no reviews yet.

Be the first to review “Kingston Fury Beast 16GB DDR5 RGB 5200MT/s Memory (Kit Of 2) (KF552C40BBAK2-16)”

Your email address will not be published. Required fields are marked *