Description

Kingston FURY KF436C18BBAK2/32 is a kit of two 2G x 64-bit (16 GB) DDR4-3600 CL18 SDRAM (Synchronous DRAM) 1Rx8 memory modules, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. The total kit capacity is 32 GB.

Each module has been tested to run at DDR4-3600 with low-latency timings of 18-22-22 at 1.35 V. The SPDs are programmed to JEDEC-standard DDR4-2400 timings of 17-17-17 at 1.2 V. Each 288-pin DIMM uses gold contact fingers.

Specifications:

CL (IDD) 17 cycles
Row Cycle Time (tRCmin) 45.75 ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 350 ns (min.)
Row Active Time (tRASmin) 32 ns (min.)
UL Rating 94 V – 0
Operating Temperature 0C to +70C
Storage Temperature -40C to +85C
Factory Timing – Default (JEDEC) DDR4-2400 CL17-17-17 @ 1.2V
Factory Timing – XMP Profile #1 DDR4-3600 CL18-22-22 @ 1.35V
Factory Timing – XMP Profile #2 DDR4-3000 CL16-18-18 @ 1.35V
Power Supply (VDD) 1.2V Typical
VDDQ 1.2V Typical
VPP 2.5V Typical
VDDSPD 2.2V to 3.6V
On-Die Termination (ODT) Supported
Internal Banks 16 banks; 4 groups of 4 banks each
Data Strobe Bi-Directional Differential
Pre-Fetch 8-bit
Burst Length Switch on-the-fly BL8 or BC4 (Burst Chop)
Module Height 1.62 (41.2 mm) with heatsink

Reviews

There are no reviews yet.

Be the first to review “Kingston Fury Beast 32GB (16GBX2) RGB DDR4 3600MHZ (KF436C18BBAK2/32)”

Your email address will not be published. Required fields are marked *