StereoPi Slim Edition

Description

Description Videos Show Reviews StereoPi Slim Edition – Perfect for DIY ninjas and those wanting to embed StereoPi in a tight space. This board is the same as the standard edition, but without all the bulky connectors – the Ethernet RJ45 jack, GPIO header, and dual USB Type-A connector have not been populated. To use this board, you will need your own Raspberry Pi Compute Module, cameras, camera ribbon cables, and power cable. The board comes with two short power cables. From spatially aware robots to drone livestreaming StereoPi is an open source stereoscopic camera based on Raspberry Pi. It can capture, save, livestream, and process real-time stereoscopic video and images. StereoPi opens up countless possibilities in robotics, AR/VR, computer vision, drone instrumentation, panoramic video, and more. StereoPi is easy to use with other familiar tools. Weve already made many demos of StereoPi integrating with other tools, including: YouTube : livestream 3D video over the Internet Oculus Go : livestream 3D video directly to a VR headset OpenCV : build real-time depth maps ROS : create a spatially aware robot Hugin : create 360 panoramic photos and videos Wifibroadcast : wirelessly livestream 3D video from a drone Example Video & Photo The above video was captured by running this simple command from a Raspbian terminal: raspivid -3d sbs -w 1280 -h 480 -o 1.h264 Taking a stereoscopic image is just as easy using: raspistill -3d sbs -w 1280 -h 480 -o 1.jpg Stereo photo sample from StereoPi Features & Specifications Raspberry Pi Compatibility: Raspberry Pi Compute Module 1 Raspberry Pi Compute Module 3 Raspberry Pi Compute Module 3 Lite Raspberry Pi Compute Module 3+ 8 GB / 16 GB / 32 GB eMMC flash Raspberry Pi Compute Module 3+ Lite Dimensions: width x length: 90 mm x 40 mm height: 23 mm (standard edition) / 15 mm (slim edition) Video: input: two 15-pin CSI-2 camera connectors output: HDMI Camera Support: Raspberry Pi cameraV1 (OV5647 sensor) Raspberry Pi cameraV2 (Sony IMX 219 sensor) HDMI video capture module (single mode, on Toshiba TC358743XBG chip) Connectivity: GPIO: 40-pin classic Raspberry Pi header USB: 2 x USB Type-A, 1 x USB pin header Ethernet: RJ45 jack Storage: microSD card slot (accessed by Raspberry Pi CM3/3+ Lite) Power: 5 VDC input via two-pin header manual power switch Software: firmware update via Micro USB connector runs standard Raspbian excellent Python support tons of example code Resources StereoPi Wiki Page StereoPi Project Forum Videos Hide Videos Show Videos StereoPi review (English version) StereoPi board review. A a stereoscopic digital camera board b… 0 Reviews Hide Reviews Show Reviews